DKS 9500 Maximum Security Gate Operators from North Shore Commercial Door are designed for use on very large and very heavy gates in maximum security applications only. The heavy-duty 9530 model (Item# 9530-380) is not for use in applications serving the general public. It features an integral internal direct driven limit switch system that cannot be tampered with externally. High tensile strength chain provides a direct mechanical linkage to the gate so it will not slip. The chain is unaffected by the challenges of uneven terrain, weather, or other contaminants such as dirt, oil, grease, ice, etc. Gate speed can be set to 1-2 Ft./Sec. with an electronic braking option and anti-tailgating feature. Installation is simple with programming switches and troubleshooting is easy with built-in diagnostics check for specific fault conditions.
Speed control module.
Slow start / slow stop.
Direct driven limit nuts.
Adjustable partial open..
Gate tracker reporting output.
Ports for plug-in loop detectors.
Selectable stop / reverse loop functions.
Two 115 VAC convenience outlets.
Fail-secure operation includes crank for manual operation.
Built-in 3-button control (open-close-stop)
Built-in power On/Off switch.
Maximum gate length 160-feet.
HP, maximum gate weight*, speed and chain size:
9530 - 3 HP, 10,000 Lbs., 2 ft/sec, #80 chain.
9550 - 5 HP, 15,000 Lbs., 1 ft/sec, #100 chain.
9555 - 5 HP, 10,000 Lbs., 2 ft/sec, #80 chain.
9575 - 7.5 HP, 25,000 Lbs., 2 ft/sec, #100 chain.
(*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
10:1 or 40:1 gear reduction running in a continuous oil bath (dependent on model).
Electronic braking - all models.
Self-adjusting disc brake with manual release (9555 only).
208, 230, 460 VAC three-phase.
Operator is shipped with chain brackets and 20-feet of #80 or #100 chain (dependant on model).
Class III and IV applications only.
ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)